Delta Mechanical
If you are looking for a quality Initial Pinch plate roll for your shop, with moderate investment, which will give you long service, the Delta line is your answer. If your shop is not in constant production of rolled parts but has an occasional need, then you will not mind pre-bending the blank and pulling it out of the rolls and re-aligning it to pre-bend the other lip, then use our Delta rolls.The Delta mechanical models are limited to the most popular material thicknesses used in the type of shop described above. The Hydraulic models, slightly more expensive, are becoming more and more popular, so, COMAL ITALIA offers a few more models in that version.

Machine Standard Features:
·Frame built of laser cut high strength steel, welded, stress relieved and sand blasted.
·All UL listed GE electrical components or equivalent installed in a UL listed NEMA 12 equivalent electrical cabinet with master breaker
·Top roll powered by gear-motor
·Three extended rolls to accept section forming tooling
·Manual lifting of pinching and bending rolls
·Manual drop-end
·Tilting of bending roll directly from controls console
·Separate Controls console rolling on wheels
·Safety devices and operating manual according to CE norms

Optional Features and Equipment
· Double foot pedal
· Quadruple foot pedal
· Powered lifting of the bending roll
· Bending rolls assembled on bearings
· Universal section bending tools
· Cone bending device
· Digital readout for bending roll, basic model
· Digital readout for the bending roll, with 1 position preset
· Digital readout for the bending roll, with 20 position preset